Models

Capacity:
2.45 cubic yards (1.87 cubic meters) capacity
processes approximately 1 cubic yard (0.76 cubic meter) per day

Specifications:
This portable unit is mounted on a 5ft x 7ft all-steel single axle trailer. It can be slid off onto a stationary platform, if needed.

1/4 inch thick drum is 4 feet in diameter by 8 feet in length and rides on four all-steel 1,500 pound rotor casters.
Rotation provided by a 1/6^th hp 115 volt electric motor and gear drive.
-Three slide-gate unloading doors

Capacity:
5.76 cubic yards (4.40 cubic meters) capacity
processes approximately 2 cubic yards (1.53 cubic meters) per day

Specifications:
This portable unit is mounted on a 6.5ft x 15.5ft all-steel dual-axle trailer. It can be slid off onto a stationary platform, if needed.

3/8 inch thick drum is 5 feet in diameter by 12 feet in length and rides on four all-steel 1,500 pound rotor casters.
Rotation provided by a 1/6^th hp 115 volt electric motor and gear drive.
-Three slide-gate unloading doors

Capacity:
11 cubic yards (8.41 cubic meters) capacity
processes approximately 4 cubic yards (3.06 cubic meters) per day

Specifications:
This unit is available in a portable or stationary configuration.
Portable: The unit is mounted to a 6.5ft x 15.5ft all-steel dual-axle trailer with four 7,500 lb capacity jacks for stability.

3/8 inch thick drum is 6 feet in diameter by 16 feet in length and rides on four all-steel 10,000 pound rotor casters.
Rotation provided by a 1/2^th hp 115 volt electric motor and gear drive.
-Three slide-gate unloading doors

Capacity:
29.5 cubic yards (22.55 cubic meters) capacity
processes approximately 8 cubic yards (6.12 cubic meters) per day

Specifications:
This unit is mounted on an eight-inch I-beam frame with slope built into the casters and is designed to be mounted on a flat slab of concrete.

3/8 inch thick drum is 8 feet in diameter by 24 feet in length and rides on four all-steel 1,500 pound rotor casters.
Rotation provided by a 1.5 hp 230 volt electric motor and gear drive.
-Three slide-gate unloading doors
-Uses single-phase electricity
-Uses low-gear, high-torque ratio for reduced drive motor  requirements and operating cost
-Designed to operate in a covered area

Capacity:
49 cubic yards (37.46 cubic meters) capacity
processes approximately 16 cubic yards (12.23 cubic meters) per day

Specifications:
This unit is mounted on a twelve-inch I-beam frame with slope built into the casters and is designed to be mounted on a flat slab of concrete.

One inch thick insulated steel drum is 8 feet in diameter by 40 feet in length and rides on four all-steel 1,500 pound rotor casters.
Rotation provided by a 3 hp 230 volt electric motor and gear drive.
-Three slide-gate unloading doors
-Uses single-phase electricity
-Uses low-gear, high-torque ratio for reduced drive motor requirements and operating cost
-Designed to operate in a covered area

Capacity:
96 cubic yards (73.40 cubic meters) capacity
processes approximately 32 cubic yards (24.47 cubic meters) per day

Specifications:
This unit is mounted on a sixteen-inch I-beam frame with slope built into the casters and is designed to be mounted on a flat slab of concrete.

One inch thick insulated steel drum is 10 feet in diameter by 50 feet in length and rides on four all-steel 1,500 pound rotor casters.
Rotation provided by a 5 hp 230 volt electric motor and gear drive.
-Three slide-gate unloading doors
-Uses single-phase electricity
-Uses low-gear, high-torque ratio for reduced drive motor requirements and operating cost
-Designed to operate in a covered area